Factory Automatic Hydraulic Block Machine aac Block Production Line
Price Made In China
Autoclaved Aerated Concrete (AAC), or otherwise known as Autoclaved Cellular Concrete (ACC), is a lightweight, high-insulating, durable building product,
which is produced in a wide range of sizes and strengths.
Thanks to its many excellent properties, AAC is equally suitable
for residential, multistory,
commercial and industrial buildings. For nearly 70 years,
Autoclaved Aerated Concrete (AAC) has proved its superior quality in all areas of building
construction and in virtually all climatic conditions throughout the world.
The raw materials - quartzite sand (or fly ash), lime and water -
can be found in almost unlimited quantities throughout the world. These raw materials are
then processed to provide a building material with a large number of air pores -
aerated concrete. And it is precisely these pores in addition to the solid structure of calcium
silicate hydrates which give AAC its exceptional product properties: high compressive
strength, excellent thermal insulation, low material weight, ease of workability and handling,
universal application, non-allergenic, and efficient construction.
Plant Featues:
1. All the control system and control cabinet adopt Schneider Electric.
2. Control system are composed of 4 subsystems: power distribution
control system, Schneider PLC programmed controller, touch screen
monitoring system, industrial computer monitoring system. CANopen
field bus and TCP/IP Ethernet communication control technology are
adopted between each subsystems to achieve the timely data exchange
and information feedback.
3. Low failure rate and easy maintenance. Fault point and the
reason can be intuitively displayed in the touch screen ofcontrol
system, which facilitate the troubleshooting. Advanced Ethernet
technology can achieve remote monitoring and maintenance guidance.
4. The adopt of precision sensors can not only achieve the precise
control of the equipment location and speed, but also achieve high
and low limit alarm and protection of materials in the storage
tanks.
5. Easy to check historical data. This system can make the record
of the molds pouring and cutting at each section, and can also make
the recording, archiving, querying and printing of the historical
data.
6. Less machines needed, and automatic adding oil for lubrication.
7. Less workers needed. Only 4 workers needed from slurry pouring
to mould entering into autoclaves, and 3-4 workers needed for
blocks coming out of autoclaves.
Total workers needed (13 workers one shift):
Raw materials section: 3 workers;
Pouring section: 2 workers;
Cutting and grouping section: 4 workers;
Finished blocks section: 4 workers.
